RODE M3 .. PROMO.. .. NU : € 79.00-

Nederlands :
De M3 is een uiterst veelzijdige microfoon die zich thuisvoelt in de studio of op locatie. Als je behoefte hebt aan een low-noise wide-response cardioid condensator microfoon, is dit een betaalbare optie.
De M3 heeft een heavy-duty metalen behuizing, buitengewoon lage self-noise, drie stage PAD (O, -10db, -20db), een batterij status LED en een High Pass Filter.
De M3 wordt geleverd met plopkap en een adapter voor een microfoonstand. Hij werkt op een 9V batterij of op 24-48V fantoomvoeding.
+ 10 Jaar waarborg !

Enlgish:
Rode M3 - condenser microphone with cardioid polar pattern, frequency response: 40Hz-20kHz, 130dB SPL, 21dBA self noise, 200ohm thomann impedance, status LED, high pass filter, includes windshield and stand mount. Suitable for recording strings, choirs and acoustic guitars. Requires 48V phantom power or 9V battery. Dimensions: 225 x 33mm (LxD). Weight: 360g.
10 years Rode Warranty, incl. Windshield and Microphoneclip

RODE NT2A

The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large capsule (1”) studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.

At the heart of the NT2-A is the Australian designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today’s modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50’s and 60’s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.

The NT2-A’s variable controls allow switching between Omni, Figure 8, and Cardioid polar patterns. The three position high-pass filter provides a flat response or an 80Hz and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.

RODE NT4 : Stereo microphone

The Stereo wonder. The new NT4, a visually striking microphone that solves the age-old problem of stereo recording by eliminating the need to purchase matched pairs and the associated complex set-up bars and adaptors to get professional results. With a fixed 90 Deg. X/Y configuration and perfectly matched stereo condenser capsules, the NT4 lets you record any source with immaculate stereo detail.

The NT4 has a 128 dB dynamic range, 143 dBA SPL and low self-noise. Offering selectable battery or phantom power operation with power indicator light, the NT4 is ideally suited to both studio and location recording.

RODE VIDEO MIKE PRO . . . NEW

The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

At the heart of the VideoMic Pro is a high resolution 1/2" condenser capsule that provides broadcast quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels). A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

An innovative suspension system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. A lightweight and flexible yet robust multi-strand cable provides significantly lower noise transference than traditional audio cable while ensuring a high definition signal.

Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

.

RODE Skin coloured Head Set microphone . . . NEW

The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.

Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.

The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.

The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.

.